SERVICE MODE
. In this mode, when CD function are used, displays like those shown in Table 3 (which represent CD operations different than
normally displayed) appear in the LCD track number display.
. In this mode, the calendar numbers shown in Table 4 come on when an error occurs in CD operations, at which time the
track number and calendar displays become fixed at their current readouts. To release these fixed displays, press the STOP key
while operations are stopped.
. This mode is released when the power is turned off.
I DISPLAY I OPERATION
I
nu
FOCUSsearch has been begun
U1
Focus search has been begun
❑ z
Waiting for focusing
Is-l
I
Spindle kick is in progress
:2
] Both CLV and tracking are ON
fi~
Both CLV and tracking are ON
n-
Focus search has been completed (success, failure)
20
Tray closing has begun
21
Tray closing is in progress
Zz
Pick return (internal direction) is in progress
~~
Pick return (external direction) is in progress
z-
Tray closing (pick return) has been completed
an
Spindle braking has bequn
Ell
Spindle braking is in progress
g~
Pick return is in progress
I 3-
] Spindle braking and pick return have been ..
completed
~il
Fast forwarding is in progress
ql
Rewinding is in progress
~n
Plavina has beoun
51
Playing is in progress
~~
Playing is in progress (skip return operation)
En
TOC reading has been begun
I ~ I I TOC readin~ is in proqress
I
I NUMBER
E
4
5
6
7
I DISPLAY I
OPERATION
I
6Z
TOC reading is in progress
6-
TOC reading has been completed (success/failure)
10
L-point access has been begun
II
L-point access (REV64 track jump)
12
L-point access (FWD64 track jump)
13
L-point access (REV16 track jump)
qq L-point access (FWD16 track jump)
Is
L-point access (REV1 track jump)
16
L-point access has been completed
Hn
Pausing has begun
E3
Pause (REV16 track jump)
H~
Pause (FWD16 track jump)
❑ s
Pause (REV1 track jump)
HE
Pause (trace)
9U
Music acc”esshas begun
91”
Music access (high-speed access has begun)
g~ Music access (high-speed access is in progress)
93
Music access (high-speed access has been completed)
9q
Music access (high-speed access has been completed)
95
Music access (high-speed access has been completed)
96
Music access (REV64 track jump)
91
Music access (FWD64 track jump)
99
Music access (REV16 track jump)
99
Music access (FWD16 track jump)
9-
Music access (final stage)
TABLE 3 : DISPLAYS DURING THE CD OPERATION MODE
STATE OF CD ERROR
Focusing is not possible in focus search.
The subcode is not input during disc startup.
TOC cannot be read.
The focus was lost while the servo was on (during playing, etc.).
The subcode is not input while the servo is on (during playing, etc.).
The tray does not open completely.
The tray does not close completely.
TABLE 4 : DISPLAY OF CD ERRORS
-11-
.. .
To Next Page
Loading...
