Sanyo DP32640 - CLOCK TIMER; LIGHT SENSOR

– 7 –
LCD PANEL REMOVAL
Lift up the LCD panel from front cabinet.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under “Servicing Electrostatically Sensitive Devices,”
on page two in this service literature.
SPEAKER REMOVAL
Take off each speaker from back cabinet.
Mounting Wall Wire
RC LED BOARD REMOVAL
Rremove 1 screw (C: 3x14) to take the RC LED board off.
RC LED Board
C
Front cabinet
KEY SW BOARD REMOVAL
Remove 1 screw (C: 3x14) to take the KEY SW board off.
[ATTENTION]
Confirm Mounting wall wire is installed when you install
the back cabinet.
C
KEY SW Board
Back cabinet