– 8 –
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated Circuits) are Electrostatically Sensitive,
and, therefore, require special handling techniques as described under “Servicing
Electrostatically Sensitive Devices,” on page two in this service literature.
SPEAKER REMOVAL
No screws.
Take away each speaker from Front Cabinet directly.
RC BOARD AND BUTTON BOARD REMOVAL
Remove 3 screws (C:3x10) to take the RC board and button board off.
ATTENTION
– Confirm Mounting wall wire is installed when you install the back cabinet.
MECHANICAL DISASSEMBLY (Continued)
MOUNTING WALL
To Next Page
Loading...
