Sanyo DP55441 - GETTING STARTED-POWER CONNECTION;CHANNEL SEARCH; Power Connection; Initial Setup; Initial Channel Scan

11
English
GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH
POWER CONNECTION
5
Plug in AC power cord
(120V AC, 60Hz)
6
Press the POWER
button, (Follow the
on-screen instructions).
INITIAL SETUP
7
Use the CURSOR ▲and▼buttonsto highlight
Store or Home. Press the OK button. TVs will enter
INITIAL CHANNEL SCAN automatically.
Store : This mode is for the retail display setup.
Home : This mode qualifies for ENERGY STAR.
Move Enter
OK
INITIAL CHANNEL SCAN
NOTE : Skip the following process if there is no cable or
antenna being plugged-in to tuner connector.
8
Use the CURSOR ▲and▼buttonsto highlight the
Channel Scan. Press the OK button. Choose the
Scan to start the channel scanning. The scanned
channels are stored in Channel List and can be
scanned using the CURSOR ▲ and ▼ buttons.
To 120V AC outlet.