Sanyo DP55441 - PICTURE;AUDIO; ADVANCED ADJUSTMENT; Picture Settings; Video2 Operation; Audio Settings

19
English
PICTURE/ AUDIO/ ADVANCED
ADJUSTMENT
PICTURE
ADJUSTING THE PICTURE LEVELS
PICTURE MODE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR ◄and►buttonstohighlight
PICTURE.
Press the OK button.
3
Use the CURSOR ▲and▼buttonstoselectthe
Picture Mode.
Press the OK button.
4
Use the CURSOR ▲and▼buttonstoselectthe
Cinema, Standard, Vivid or User.
Press the OK
button
to add a red hook in the blank space.
BRIGHTNESS/ CONTRAST/ SATURATION/ HUE/
SHARPNESS OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR ◄and►buttonstohighlight
PICTURE. Press the OK button.
3
Use the CURSOR ▲and▼buttonstoselect
the Brightness, Contrast, Saturation, Hue or
Sharpness. Press the OK button.
4
Use the CURSOR ◄and►buttonstoadjustthe
picture setting.
NOTE:
•
These items will be grayed out if you are not select the
User mode.
•
User mode (Picture Mode) will allow to adjust brightness,
contrast,saturation,hue and sharpness function by user.
COLOR TEMPERATURE OPERATION
1
Press the MENU button to display the Main menu.
Press the OK button.
2
Use the CURSOR ◄and►buttonstohighlight
PICTURE.
Press the OK button.
3
Use the CURSOR ▲and▼buttonstohighlight
Color Temperature.
Press the OK button.
4
Use the CURSOR ▲and▼buttonstoselect
Warm, Normal or Cool.
Press the OK button.
VIDEO2 OPERATION
1
Press the MENU button to display the Main menu.
Press the OK button.
2
Use the CURSOR ◄and►buttonstohighlight
PICTURE.
Press the OK button.
3
Use the CURSOR ▲ or ▼ buttons to highlight
Video2.
Press the OK button.
4
Use the CURSOR ▲and▼buttonstoselect
YPbPr or Video.
Press the OK button.
RESET PICTURE OPERATION
Reset Picture- Make the previous adjustment settings
under the PICTURE mode recovered from the factory
default value.
1
Use the CURSOR ◄and►buttonstohighlight
PICTURE.
Press the OK button.
2
Use the CURSOR ▲and▼buttonstohighlight
Reset Picture.
Press the OK button.
3
Use the CURSOR ▲and▼buttonstoselect
Reset or Cancel.
Press the OK button.
NOTE : Press the MENU button to return to the PICTURE
mode menu.
AUDIO
SOUND MODE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR ◄and►buttonstohighlight
AUDIO.
Press the OK button.
3
Use the CURSOR ▲and▼buttonstoselectSound
Mode.
Press the OK button.
4
Use the CURSOR ◄and►buttonstoadjustthe
audio setting.(Off/Rock/Pop/Jazz/Vocal/User).
NOTES:
•
User mode (Sound Equalizer) will allow to adjust
frequency response from 100Hz to 10kHz by user.
•
Use the
CURSOR ▲and▼buttons to select frequency.
•
Use the to
CURSOR ◄and►buttonstoadjust the
frequency setting.