Sanyo DS25320 - Connecting External AV Devices

9
USING THE FRONT AUDIO/VIDEO INPUT JACKS
CONNECTING A VIDEO GAME
Switch off TV and video game before connecting cables.
1. Connect game Audio Output to the TV Audio Input. Then connect game Video Out to the
TV Video In
❶
.
2. Press POWER key
❷
to turn on the TV. Turn on external equipment also.
3. Press the INPUT key ❸ to select program source: TV signal or signal from the equipment
connected to the A/V jacks. Press the MENU key
❹
and select Game from the on-screen
menu.
POWERVOLUMECHANNEL
MENU
VIDEO IN AUDIO IN
VIDEO IN AUDIO IN
❶
VIDEO GAME
INPUT
MENU
MUTE
RECALL
RESET
CH
POWER
VOL VOL
❸
❷
REMOTE CONTROL
TV
A/V INPUT
JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect VCR Audio Out and Video Out
❶
to the TV Audio Input and
Video Input
❷
.
2. Press POWER to turn on the TV
. Turn on external equipment also.
3. Press the INPUT key to select program source: TV signal
or signal from the equipment you have connected to the
A/V jacks. See page 6 for remote control operation
.
CH3 CH4
RF
CHANNEL
IN
OUT
A/V JACKS
L- -RAUDIOVIDEO
L- -RAUDIO
VIDEO
POWERVOLUME
VIDEO IN AUDIO IN
❶
BACK VIEW OF VCR
❷
TV A/V INPUT JACKS
QuickTips
■
Make sure all cable
connectors are fully
seated on jacks.
■
A solid Blue screen
with the word Game
or Video displayed
means that the
Game/ Video mode is
selected, but no
signal is being
detected at the
Video jack.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
❹
CAMCORDER