5
USING THE FRONT AUDIO/VIDEO INPUT JACKS
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
A solid Blue screen
with the word VIDEO1
or VIDEO2 displayed
means that the
Game/Video mode is
selected, but no signal
is being detected at the
Video jacks. Check
connections, turn on
external equipment.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
CONNECTING A VIDEO GAME
Switch off TV and video game before connecting cables.
Connect game Audio Output (R/L) to the TV Audio Input (R/L). Then connect game
Video Out to the TV Video Input.
Press POWER key to turn on the TV. Turn on video game.
Press the INPUT key to select program source: TV signal or signal from the video game
connected to the A/V jacks. Press the MENU key
and select Game from the on-
screen menu. The TV will automatically change the screen and sound to factory preset
game settings.
POWER
AS
VIDEO IN L- AUDIO -R
MTS
POWER
MENU
VOL
VOL
CH
CH
MENU
VIDEO IN L- AUDIO -R
Video Game
Camcorder
TV A/V Input Jacks
AUDIO VIDEO
INPUT
R
L
UHF/VHF/CATV
75Ω
R
L
VIDEO
(MONO)
S-VIDEO
AUDIO
OUTPUT
Back of TV
Stereo Amplifier
Remote Control
USING THE AUDIO OUTPUT JACKS
CONNECTING AUDIO OUT JACKS TO A STEREO AMPLIFIER
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect the TV Audio Out (R/L) to
the Stereo Amplifier In (R/L).
Press POWER to turn on the TV.
Turn on external equipment also.
Note:
Do not connect external
speakers directly to the TV.
RECALLMENU
CAPTION SLEEP
RESETINPUT
CH
VOL VOL
POWER
VCR TV AUX
123
456
789
0
Press
INPUT key after
connecting cables to
access the A/V inputs.
There is NO need to tune to
a blank channel.
To Next Page
Loading...
