Sanyo DS27224 - Using the Rear Audio; Video Input Jacks; Connecting a VCR or DVD Player

6
CONNECTING A VCR OR DVD PLAYER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

Connect VCR, DVD, or other equipment’s Audio Video Out to the TV Audio Video Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
 Optional
Connect DVD, or other equipment’s S-Video Out to the TV S-Video In Jack.
Using the S-Video jack overrides the rear Video jack.

Press POWER to turn on the TV. Turn on external equipment also.

Press the INPUT key to select VIDEO2.
Note: Only one device at a time can be connected to these jacks.
AUDIO VIDEO
INPUT
R
L
UHF/VHF/CATV
75Ω
R
L
VIDEO
(MONO)
S-VIDEO
AUDIO
OUTPUT
IN
OUT
A/V JACKS
L- -RAUDIOVIDEO
L- -RAUDIO
VIDEO
S-VIDEO OUT
RL
OUTPUT
AUDIO OUT
VIDEO OUT
CAPTION SLEEP
RESETINPUT
POWER
VCR TV AUX
123
456
789
0

Back View of VCR


Remote Control
TV A/V Input Rear Jacks

DVD
USING THE REAR AUDIO/VIDEO INPUT JACKS

QuickTips

Always match cables
according to the colors;
RED for right audio,
WHITE for left audio and
YELLOW for video.

A solid Blue screen
with the word VIDEO1
or VIDEO2 displayed
means that the
Game/Video mode is
selected, but no signal
is being detected at the
Video jacks. Check
connections, turn on
external equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032



CONNECT
VCR
OR
DVD
Press
INPUT key after
connecting cables to
access the A/V inputs.
There is NO need to tune to
a blank channel.