SEARCHING FOR RECORDED VIDEO5
12 English
OPERATION
1 Press the appropriate [ALARM] button
during playback.
z Each time the “ ” button is pressed, playback will
skip to the preceding alarm video recording.
z Each time the “ ” button is pressed, playback will
skip to the subsequent alarm video recording.
z When playback is performed after an alarm search, the
frame at the start and end of each alarm recording will
be paused.
Press the appropriate [ALARM] button to play the
previous or next alarm recording.
z You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
Use the following procedure to display all of the alarm
recordings stored in the alarm recording area as
thumbnails list.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
2 Turn the jog dial to select “ALARM
THUMBNAIL SEARCH”, and then turn
the shuttle dial clockwise.
The nine most-recent alarm recordings are displayed.
An alarm number is indicated together with each alarm
recording, and the number of the currently selected
recording will flash.
3 Turn the jog dial to move the cursor and
select the alarm recording for playback.
The alarm number for the selected recording will start to flash.
z To display the next or previous recording
Turn the jog dial clockwise or counter-clockwise
accordingly.
z To leave search mode
Press the [SEARCH] button. SEARCH indicator turns off.
4 Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
z In the same way as for alarm searching, playback is
only possible within each individual alarm recording.
Press the appropriate [ALARM] button to play the
previous or next recording.
z You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
Use the following procedure to play a recording from the
normal recording area (i.e., a normal recording or timer
recording) or alarm recording area by specifying its date
and time.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
To view alarm video before or after the current
playback
Alarm thumbnail search
01-01-04 00:00:00 EN A ALARM 0000
02
ALARM
SEARCH
Time/date search
0016 0015 0014
0013 0012
0010 0009 0008
0011
0011
SEARCH
e00_l8hbe_us_qg_7.book Page 12 Tuesday, April 13, 2004 1:04 PM
To Next Page
Loading...
