Sanyo DSR-3506 - Viewing Video from a Camera; Viewing on the Full Screen; Viewing on Quad Screens; Viewing on Multi 6 Screens

6 English
OPERATION
2 VIEWING VIDEO FROM A CAMERA
Example: Selecting Camera 2
1 Press the No. 2 [CAMERA SELECT]
button.
The No. 2 CAMERA SELECT indicator lights up and video
from Camera 2 is displayed on a full screen.
1 Press the [QUAD] button.
The QUAD indicator lights up and the monitor display is
divided in four. Video from Camera No. 1 through Camera
No. 4 is displayed each of the segments.
Each time this button is pressed, the content of the split
screen will toggle between video from cameras No. 1
through No. 4 and video from cameras No. 5, No. 6, No. 1,
and No. 2.
1 Press the [MULTI] button.
The MULTI indicator lights up and the monitor display is
divided in six.
[CAMERA SELECT] buttons
[MULTI] button
[SEQUENCE] button
[MON2] button
[QUAD] button
Viewing on a full screen
Viewing on quad screens
02
0201
0403
QUAD
Viewing on multi 6 screens
0605
0201
02
03
01
0604 05
MULTI
e00_l8hbe_us_qg_7.book Page 6 Tuesday, April 13, 2004 1:04 PM