Viewing Recorded Video
5
English
■ To zoom in on the displayed video:
Press the ZOOM button during playback (or live)
mode in full-screen view.
A zoom frame appears in the center of the
screen. Move the zoom frame to the desired
position.
To move the frame horizontally, simply turn the J-dial
clockwise or counterclockwise.
Turn the S-dial clockwise to confirm the horizontal position.
Then, turn the J-dial to move the frame up or down.
Turn the S-dial clockwise.
a The area enclosed by the zoom frame is enlarged by a
factor of two.
To exit from zoom mode, press the ZOOM button
again.
4
3
2
1
■ To display using the quad-screen display
(when multiple recorded video files are
available):
Press the QUAD button.
a Each time you press the button, the quad-screen switches
to display the views for the next set of cameras.
■ To display using the multi-screen (multi-6
screen) display (when multiple recorded
video files are available):
Press the MULTI button.
a The monitor screen changes to a multi-6 screen.
To Next Page
Loading...
