Sanyo DSR-3706PA - About Configuration Via Menus

About Configuration via Menus
10
English
■ Configuration Basics:
Press the MENU button.
Turn the J-dial to select the menu item to be
configured, and then turn the S-dial clockwise.
1. INITIAL SET
Lets you configure “initial” settings such as display language and
clock settings.
2. RECORD SET
Lets you configure recording-related settings that control the
recording and alarm mechanisms.
3. GENERAL SET
Lets you configure general settings that control the display, alarm
buzzer, security, and so on.
4. SCREEN SET
Lets you configure screen-related settings that control multi-screen
display arrangements, automatic screen scrolling, color tone, and
so on.
5. POWER LOSS/USED TIME
Displays when any power failure occurred, how long the hard disk
has been in use, etc.
6. INITIALIZATION LOG
Displays the history of hard disk initialization.
7. COPY MENU SETTINGS
Allows you to save or load settings you configured via menus.
2
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE
1
a The setting screen for the selected item appears.
(This screen appears when you have selected “1. INITIAL
SET”.)
An item associated with –
>
indicator contains a
submenu; turn the J-dial to select your desired
item, and then turn the S-dial clockwise.
a The setting screen for the selected item appears.
Configure each of the settings you want to
change.
J-dial: Turn clockwise or counterclockwise to select an option
or value.
S-dial: Turn clockwise to save your setting.
When you are done, press the EXIT/OSD button.
¡For more information on each of the menu screens, refer to the
Instruction Manual.
¡The following pages introduce most common menu-based
configuration tasks; however, refer to the Instruction Manual for
detailed configuration procedures.
¡When you change any settings, stop recording.
5
4
3
<INITIAL SET>
1.LANGUAGE/CLOCK SET ->
2.CAMERA DETECT ->
3.TITLE SET ->
4.HOLIDAY SET ->
5.TIME PERIOD SET ->
MOVE:JOG SELECT:SHUTTLE
1 5 2 – 4
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)