Sanyo DSR-3706PA - Page 12

About Configuration via Menus
11
English
■ To name a camera:
Press the MENU button to open the MAIN MENU
screen, and choose “1. INITIAL SET”.
On the INITIAL SET screen, choose “3. TITLE
SET”.
Use the CAMERA SELECT button to specify the
number of camera you want to name.
You can enter a name using up to 10 characters
by repeating the following operation: turn the
J-dial until your desired letter or number is
displayed and then turn the S-dial clockwise.
When you are done, press the EXIT/OSD button.
5
<TITLE SET>
CAMERA NO.03
--------
03
4
3
2
1
■ To configure easy recording settings based
on your desired recording duration (in units
of days):
Press the MENU button to open the MAIN MENU
screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose “1. NORMAL
REC EASY SET”.
On the NORMAL REC EASY SET screen, choose
“RECORDING DURATION BASE”.
Configure the recording duration and other
settings as needed.
qAllows you to set the recording duration in units of days.
wAllows you to turn on or off the timer-controlled recording
mechanism.
eAllows you to set the image quality.
rAllows you to turn on or off the sound recording
mechanism.
tShows the number of cameras.
yShows the recording rate.
When you are done, turn the S-dial
counterclockwise.
a A WARNING screen appears.
¡The settings you selected will change the recording rate configured
in other menus.
¡Selecting “NO” in the WARNING screen returns you to step 4
above.
In the WARNING screen, select “YES” and then
turn the S-dial clockwise.
When you are done, press the EXIT/OSD button.
7
6
5
<RECORDING DURATION BASE>
RECORDING DURATION : -- DAYS
TIMER RECORDING(DLY) : OFF
START --:-- STOP --:--
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
NUMBER OF CAMERAS : 2
REC RATE : ------FPS/CAM
q
w
e
r
t
y
4
3
2
1