Sanyo DSR-3706PA - Page 13

About Configuration via Menus
12
English
■ To configure easy recording settings based
on your desired recording rate:
Press the MENU button to open the MAIN MENU
screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose “1. NORMAL
REC EASY SET”.
On the NORMAL REC EASY SET screen, choose
“REC RATE BASE”.
Configure the recording rate and other settings as
needed.
qAllows you to set the recording rate.
wAllows you to turn on or off the timer-controlled recording
mechanism.
eAllows you to set the image quality.
rAllows you to turn on or off the sound recording
mechanism.
tShows the number of cameras.
yShows the recording duration.
Turn the S-dial counterclockwise.
a A WARNING screen appears.
¡The settings you selected will change the recording rate configured
in other menus.
¡Selecting “NO” in the WARNING screen returns you to step 4
above.
In the WARNING screen, select “YES” and then
turn the S-dial clockwise.
When you are done, press the EXIT/OSD button.
7
6
5
<REC RATE BASE>
REC RATE : ----- FPS/CAM
TIMER RECORDING(DLY) : OFF
START --:-- STOP --:--
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
NUMBER OF CAMERAS : 2
RECORDING DURATION : ---- DAYS
q
w
e
r
t
y
4
3
2
1
■ To configure the hard disk recording area
allocations:
Changing this setting will erase any existing recording data.
Press the MENU button to open the MAIN MENU
screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose
“2. RECORDING AREA SET”.
Change the normal and alarm recording area
allocations.
qShows the total capacity of the hard disk.
wAllows you to set the normal recording area allocation.
eAllows you to set the alarm recording area allocation.
When you are done, turn the S-dial
counterclockwise.
a A WARNING screen appears.
¡Selecting “NO” in the WARNING screen returns you to step 3
above.
In the WARNING screen, select “YES” and then
turn the S-dial clockwise.
a The recording area allocations are changed and the hard
disk is initialized.
When you are done, press the EXIT/OSD button.
6
5
4
<RECORDING AREA SET>
TOTAL CAPACITY : 120GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
q
w
e
3
2
1