Sanyo DSR-3706PA - Page 8

Using Date/Time Search to Play Back Recorded Video
7
English
¡ALARM THUMBNAIL SEARCH
Searches for alarm-recorded video files (alarm recordings) and
displays a thumbnail list of search results; from this list, you can pick
any thumbnail to play back the corresponding video file.
• Turn the J-dial to select your desired thumbnail and then turn the
S-dial clockwise to start playback.
¡ARCHIVE AREA SEARCH
Searches the archive area (
☞
see page 28 of the Instruction Manual)
for stored video files and displays a list of search results; from this list,
you can select your desired video file and play it back.
qArchive number
wRecording date
eRecording start time
rChannel (camera number)
tTotal capacity of the archive area
yUsed space of the archive area
uPreview of your selected stored video
• Turn the J-dial to select the desired number and then turn the S-dial
clockwise to start playback.
<ARCHIVE AREA SEARCH>
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 05-01 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 02-01 03:10 1
0005 02-01 04:25 1
0006 04-01 02:40 1
0007 04-01 01:25 1
0008 04-01 01:25 1
MOVE:JOG SELECT:SHUTTLE
q
w
er tyu
00110011
0016 0015 0014
0013 0012
0010 0009 0008
0016 0015 0014
0013 0012
0010 0009 0008
■ Other Search Modes:
The SEARCH menu, shown in step 1 on the previous page, allows
you to choose from various search modes.
¡ALARM SEARCH
Searches for alarm-recorded video files (alarm recordings) and
displays a list of search results; from this list, you can select your
desired video file and play it back.
qAlarm number
wAlarm recording date and time
eChannel (camera number)
rTotal number of alarm recordings
tPreview of your selected alarm recording
• Turn the J-dial to select your desired number and then turn the
S-dial clockwise to start playback.
<ALARM SEARCH>
NO DATE TIME CH TOTAL ALARMS
0016 05-01 09:53 1 00016
0015 05-01 09:53 1
0014 05-01 09:53 1
0013 05-01 09:53 1
0012 05-01 09:52 1
0011 05-01 09:51 1
0010 05-01 09:51 1
0009 05-01 03:10 1
MOVE:JOG SELECT:SHUTTLE
q
w
ert
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE