18
INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER
6 SEARCHING FOR RECORDED IMAGES
Images recorded on the hard disk can be searched and
played back. There are two search methods available.
Image to search
Search in <Search> screen
z You can use the button operations to freeze, fast-
forward or perform other operations on retrieved
images being played back.
(9) Alarm search
Lets you search and play back alarm images from the
recording list.
(10)Date/time search (JP.19)
Lets you search and play back recorded images by
date/time.
Lets you search and play back all the alarm images on the
hard disk.
1 Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The <ALARM SEARCH> screen appears.
2 Check that “ALARM SEARCH” is
selected, and press the [ ] button.
The search screen appears.
(1) NO:
Displays the alarm number.
(2) DATE/TIME:
Displays the date/time at which the alarm was
received and the image recorded.
(3) Alarm count:
Displays the total number of recorded alarm images.
(4) Preview screen:
Displays the selected alarm image.
(1)
(2)
Alarm search
SEARCH
MENU RESET
MENU
REVIEW
CUE
EXIT/OSD
PLAY/
STOP
STILL
[ ] button[SEARCH] button [ ] button
[ ] button
(1) (2)
(4)
(3)
e_dsr_m800.book Page 18 Friday, January 31, 2003 5:45 PM
To Next Page
Loading...
