9
43
INITIALIZE/ADD HDD
To add a hard disk, contact a Sanyo service center. When
adding a hard disk, use an add-on type hard disk unit (sold
separately).
[Setting conditions]
z After adding a hard disk, be sure to initialize it. Note that
both hard disks will be initialized, and any data on the
original hard disk will be erased.
Hard disk setting screen
z Mirroring: After adding a hard disk, you can record the
same image on both hard disks. If an image write error
occurs on one disk, you can still read the image from
the other.
z Playback disk: When mirroring is set, the digital video
recorder automatically sets which of the two hard disks
to read the recorded image from.
Adding a hard disk (120 GB model only)
e_dsr_m800.book Page 43 Friday, January 31, 2003 5:45 PM
To Next Page
Loading...
