24
INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER
1 LANGUAGE/CLOCK SET
You can perform the following functions:
Change the language used to display on-screen
information.*
Set the date and time displayed on the normal screen.*
Set the clock to adjust automatically for daylight savings
time.
Set all the devices to the same time automatically when
multiple devices are connected.
* See P.12.
1 Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
appears.
2 Select “1. LANGUAGE/CLOCK SET”,
and press the [ ] button.
The <LANGUAGE/LANGUE/IDIOMA> screen appears
with the cursor positioned on ENGLISH.
3 Press the [ ] or [ ] button to select
“MODE” under <DAYLIGHT SAVING>.
4 Press the [ ] button.
“USE” flashes.
5 Press the [ ] or [ ] button to change
the setting.
[Settings] ( indicates initial setting.)
6 Press the [ ] button.
The cursor moves to the date/time at which to switch from
standard time to daylight savings time.
<DAYLIGHT SAVING> settings
<MAIN MENU>
SEARCH
MENU RESET
MENU
REVIEW
CUE
EXIT/OSD
PLAY/
STOP
STILL
[ ] button[MENU] button [ ] button
[ ] button [EXIT/OSD] button
USE Time is automatically adjusted to daylight
savings time.
NO USE Time is not adjusted to daylight savings time.
e_dsr_m800.book Page 24 Friday, January 31, 2003 5:45 PM
To Next Page
Loading...
