Sanyo DSR-M800 - 2 Rec Mode Set; Recording Mode Settings Configuration

26
1 LANGUAGE/CLOCK SET
INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER
5 Press the [EXIT/OSD] button.
The display returns to the normal screen.
6 Use the same procedure to set the
<EXT.CLOCK SET> time on the second
digital video recorder.
When you have finished making the settings, the display
returns to the normal screen.
z When the digital video recorder is connected to a PC or
other external device through a network, you can also
set the time from that device. When connected to a PC,
see the instructions for the VA-SW800 application
software.
HUB
HUB HUB HUB
HUB
DVR DVR DVR DVR
PC
To network
e_dsr_m800.book Page 26 Friday, January 31, 2003 5:45 PM