11
OPERATION
SETTING CLOCK
To set the correct time of day, follow the steps below.
Example: To set 3:15:
Step Procedure Keypad
1
Press CLOCK. lights and a tone
CLOCK
will sound. The display will show
“00:00” with the first “0” flashing.
Press 0, 3,1 and 5 to enter time of
day. You must press 4 numbers to
set the clock (2 for the hour and
03:15
2
2 for minutes).
When entering hours 1-9, a zero
must be entered first.
3
Press CLOCK.
turns off and the
display will show the present time.
CLOCK
The colon will remain flashing.
Note: •
If the clock (or display) shows any abnormality, unplug the oven from
the AC outlet. Plug it in again and then reset the clock.
• When power resumes after a
power interruption, reset the clock
following the instructions above.
• The display will show “0:00” if the clock is not set.
• If the clock is not set within 1 minute of pressing “CLOCK” or
STOP/CLEAR is pressed, the display will return to “0:00”.
CHILD LOCK-OUT
The oven has a safety feature which prevents use by children. The
feature locks the operation of the oven until canceled.
To set:
Step Procedure Keypad
Press and hold STOP/CLEAR for 3
1
seconds. A tone will sound and the STOP/CLEAR
lights. The display will show
.
To cancel:
Step Procedure Keypad
Press and hold STOP/CLEAR for 3
1
seconds. A tone will sound and the STOP/CLEAR
turns off
.
STOPPING THE OVEN WHILE IN OPERATION
1.
You can stop the oven by pressing
STOP/CLEAR
once or by opening the door.
2. You can resume cooking by closing the door and pressing START.
3. Press STOP/CLEAR
twice to stop the oven and clear all settings.
To Next Page
Loading...
