Sanyo FW55C87F - Channel Management

Search for channels
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select Search for channels, then press OK.
3
Use J K to select Start, then press OK.
Install channels
You can search and store all channels. If you move the unit to a different
area after the initial setting, it is recommended to perform
Autoprogramming.
4
Use H I to select Antenna or Cable, then press OK.
5
Press OK on Start.
●
When the scanning and memorizing of available channels is
completed, the lowest memorized channel will be displayed.
6
Follow the on-screen instructions to complete the installation.
0
0
12 3 4
Stop
Total progress:
Analog channels found:
Digital channels found:
complete.
more than 20 minutes to
Auto programming may take
wait...
System searching. Please
Channel settings
1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select Channel settings, then press OK.
3
Adjust the following items.
Uninstall channels
Installation mode
Mono/Stereo
Digital audio language
Change PIN
Child lock
Channel installation
Channel installation
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
Installation mode
1
Use H I to select Channel installation, then press OK.
2
Use H I to select Installation mode, then press OK.
3
Use H I to select Antenna or Cable, then press OK.
●
When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
●
When Cable is selected, the TV detects signals supplied by cable.
It searches for DTV, analog TV and cable channels available in your
area.
Uninstall channels
The channels selected here can be skipped when selecting the channels
using CH + / –.
Those channels can still be selected with the NUMBER buttons.
1
Use H I to select Channel installation, then press OK.
2
Use H I to select Uninstall channels, then press OK.
3
Use H I to select the channel you want to remove, then press OK.
●
The removed channels are not displayed on the list of favorite
channels.
●
To reactivate a removed channel, use H I then press OK.
36 .English
Continued on next page.