Sanyo FWSB415E - CONNECTIONS; Connect to TV; Connect Audio from Other Devices

–
9
–
EN
CONNECTIONS
Included cable used in this connection are as follows:
• Line-in cable × 1
1
Connect to a device
Connect to TV
Rear of TV
HEADPHONE
AUDIO OUT
or
DIGITAL AUDIO
OUT (OPTICAL)
or
Rear of soundbar
Digital audio optical cable
(not included)
Line-in cable
included
Good
Good
Best
Best
LINE
OPTICAL
AUX
Most modern digital TVs do not have red and white coaxial analog audio outputs, but do have red and white coaxial analog audio
inputs. If you plan to use red and white analog coaxial cables to connect your TV to this soundbar, please ensure that your TV
does indeed have red and white coaxial analog audio out. Refer to your TV's user manual for details.
To connect soundbar directly to other devices (Blu-ray™ player, game system, etc.), see your device's user manual.
Use a coaxial (RCA) to optical Toslink digital audio converter (not included) for our soundbar which only has an optical input.
Connect audio from other device
Rear of soundbar
R
L
DIGITAL AUDIO
OUT (OPTICAL)
HEADPHONE
AUDIO OUT
Audio cable
(not included)
e.g.) Blu-ray™ player
e.g.) MP3 player
e.g.) Video game
Digital audio optical cable
(not included)
Line-in cable
included
LINE
OPTICAL
AUX
NOTE(S)
• Make sure the soundbar is turned off when connecting cables.
• Check whether all connection cables are properly connected.
• If you connect from the headphone output on the device’s source to the line-input on the soundbar, make sure the
volume from the headphone output on the device’s source is set to an appropriate mid-level sound. Setting it too
low will produce weak output from the soundbar or setting it too high could cause distortion.
• If a line / optical / AUX connection fails when connected to a TV, check the audio settings on the devices.
Continued on next page.