11
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ANALOG AV CONNECTIONS
Switch off TV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect game Audio Output (R/L) to the TV Audio
Input (R/L). Then connect game Video Output to
the TV Video Input.
2
Press POWER to turn on the TV, then turn on
external equipment.
3
To access Audio / Video inputs,
press the INPUT key to select
Video1.
CAMCORDER
VIDEO GAME
USING THE FRONT VIDEO AND AUDIO INPUT JACKS TO
CONNECT A VIDEO GAME OR OTHER EQUIPMENT
REMOTE CONTROL
3
2
1
“No Signal” will appear randomly on the screen when no signal is
detected at the VIDEO1 input jack.
Press the INPUT key after connecting cables to access the AV
inputs. There is NO need to tune to a blank channel.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you
must
run All
Channel Search twice before you can select the AV inputs.
What you will need for
connections:
Audio Video Cable – 1
To Next Page
Loading...
