Sanyo HT27546 - TV Jack Locations and Functions; Front Panel AV Inputs; Rear Panel Connectivity Ports

7
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
DTV FRONT / BACK—JACKS LOCATIONS AND FUNCTIONS
 Analog Antenna Input (UHF/VHF/CATV), PAGE 5—
Connect an RF antenna or Analog cable system to this
jack.
 Analog Audio Out (L/R) Jacks, PAGE 10—Connect
external audio equipment here.
 Component Video Input (Y, Pb, Pr), PAGE 9—
Connect digital video equipment to the Y,Pb,Pr and
Audio L/ R jacks.
NOTE: Audio / Video Input (VIDEO2) and Component
inputs share the same audio (R/L) input jacks.
 Digital Antenna Input, PAGE 5—Connect an RF
antenna to this jack.
 Audio Video Input (VIDEO2), PAGE 10—Connect
standard video equipment here.
NOTE: S-Video connection overrides the (VIDEO2)
composite video connection.
 S-Video Input (VIDEO2), PAGE 10—To enhance
video detail use the S-Video jack instead of the Video
jack, if available on your external equipment. (S-Video
connection will override connection to the Video input
jack.)
 Digital Audio Output, PAGE 9—Use an Optical Audio
cable to connect the Digital Audio Output to an
advanced stereo home theater system equipped with
Dolby
®
Digital 5.1.
 Audio Video Input (VIDEO1), PAGE 11—
Connect standard video equipment here.
POWE
R
CH
VOL
L - AUDIO - R
VIDEO IN

FRONT
BACK
NOTE: The Channel  (up)  (down), Volume +
(up) – (down), and Power keys function exactly
like the keys on your remote control (See #8, #11
and #17 on page 13.)






