16
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ANA (ANALOG) ANTENNA SIGNAL
Use this feature to switch between analog off-air
channels and analog cable channels.
1
Press the TUNER key to select Analog Tuner.
2
Press the MENU key to display the Main Analog
menu.
3
Use the CURSOR keys to highlight Ana
Antenna Signal.
4
Use the CURSOR < > keys to choose Cable or
VHF/UHF. Press ENTER.
5
Press the EXIT key to return to normal TV viewing.
DTV ADD-ON SEARCH
Use this feature to add new channels to the digital
antenna channel database. Also, use this feature to add
channels when broadcast towers are in multiple direc-
tions from your location.
1
Press the TUNER key to select the Digital Tuner.
2
Press the MENU key to display the Main Digital
menu.
3
Use the CURSOR keys to highlight DTV
Add-On Search.
4
Use the CURSOR < > key to select Yes. Press
ENTER.
NOTES: Turn your Antenna and repeat these steps for each
direction in which there are transmitting towers.
Go to
www.antennaweb.org
and type in your zip
code to obtain specific tower and antenna information.
NOTE: If the DTV is switched off by pressing
the
POWER
key or unplugging the AC during
Digital Add-On Search, all channel information
detected before the power loss occurred will be
saved.
To Next Page
Loading...
