Sanyo HTD-5201 - Schematic Diagram (AMP for SS)

SCHEMATIC DIAGRAM (AMP for SS)
PRODUCT SAFETY
NOTICE
Each precaution in this manual
should be followed during
servicing. Components identified
with the IEC symbol
!
!!
in the
parts list and the schematic
diagram designated components
in which safety can be of special
significance. When replacing a
component identified by
!
!!
, use
only the replacement parts
designated, or parts with the
same ratings of resistance,
wattage or voltage that are
designated in the parts list in this
manual. Leakage-current or
resistance measurements must
be made to determine that
exposed parts are acceptably
insulated from the supply circuit
before returning the product to
the customer.
- 92 -
- 93 -
This is a basic schematic diagram.