Sanyo Innuendo - Changing the Backlight Settings

Settings
2C. Settings 35
Changing the Backlight Settings
Select how long the display screen remains backlit after any
keypress is made. You can also change the Java application
backlight while running in the foreground.
To change the main screen backlight setting:
1. Highlight and press > Settings/Tools > Settings >
Display > Backlight > Main Screen .
2. Select Backlight Dim or Backlight Off .
䡲 If you select Backlight Dim , select Always Bright , Always Dim ,
or a preset length of time to elapse before the screen
backlight dims.
䡲 If you select Backlight Off , select a preset length of time to
elapse before the screen and keypad backlights turn off.
(When you select
Always Bright for the Backlight Dim setting
above, the keypad backlight will turn off after about one
minute.)
To change the outer screen backlight setting:
1. Highlight and press > Settings/Tools > Settings >
Display > Backlight > Outer Screen .
2. Highlight a time setting and press .
To change the Java application backlight:
䊳 Highlight and press > Settings/Tools > Settings >
Display > Backlight > Java Backlight > Default or Continuous .
Setting the Notification Pop-up
This option allows you to enable or disable notification pop-up
when you receive a new notification (except for incoming call and
alarm).
1. Highlight and press > Settings/Tools > Settings >
Display > Notification .
2. Select Enable pop-up or Disable pop-up .
Note
Long backlight settings reduce the battery’s talk and standby
times.
Tip
If you select Disable pop-up , you will see only a notification
icon. (The notification pop-up will not appear while an application
is running.)