Sanyo Innuendo - External Keypad Settings

48 2C. Settings
To disable data services:
1. Highlight and press > Settings/Tools > Settings >
Others > Data > Data On .
2. Read the disclaimer and press DISABLE (right softkey) to sign
out.
External Keypad Settings
Using the Touch Keypad
The touch-sensitive external keypad allows you to enter numbers
and letters and select menu items with just a light touch of your
fingers.
䢇 Use the tip of your finger to touch the center of a key. When the
key is pressed off-center, it may activate the nearby function
instead.
䢇 The touch keys are very sensitive. You don’t have to press hard
to operate.
䢇 By default, the external keypad will lock automatically when the
backlight turns off. To unlock the keypad manually, press the
Power/Lock button ( ) on the top left of the phone.
Setting the Keyguard
To avoid accidentally pressing a key, this feature enables you to
lock the touch keypad and side button while the phone is closed.
By default, your phone’s keyguard feature is set to
On . Whenever
the keyguard is on, you must first turn the keyguard off to unlock
the keypad and use your phone.
To turn off the keyguard manually:
䊳 Press the Power/Lock button ( ). Press it again to turn
the keyguard back on. (You will see
“Keyguard On” on the
outer screen.)
To turn off the keyguard from the main menu:
1. Highlight and press > Settings/Tools > Settings >
Keyguard > Off .
2. Read the message and press DONE (left softkey).
Setting the Keypad Touch Vibrate
You can make the outer keypad vibrate every time you touch a key
to confirm your action.
Note
During a call or when receiving a new notification, the proximity
sensor will automatically lock the touch keypad regardless of
whether the keyguard is on or off.