Sanyo Innuendo - Security Settings

Settings
2C. Settings 45
Headset Mode
Set up your phone for hands-free use, the type of headset (mono
or stereo), and the ringtone mode.
To set the audio mode:
䊳 Highlight and press > Settings/Tools > Settings >
Others > Headset Mode > Earpiece > Stereo or Mono .
To set the ringtone mode:
䊳 Highlight and press > Settings/Tools > Settings >
Others > Headset Mode > Ringtone Sound > Normal or 
Headset Only .
Alert Notification
Set your phone to alert you with an audible tone when you change
service areas, once a minute during a voice call, or when a call
has been connected.
1. Highlight and press > Settings/Tools > Settings >
Others > Alerts .
2. Select Beep Each Minute , Out of Service , or Connect and press
.
3. Select On or Off .
Security Settings
Locking Your Phone
When your phone is locked, you can only make calls to 911 and
Boost Customer Care.
1. Highlight and press > Settings/Tools > Settings > 
Lock Phone .
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Lock Now .
Unlocking Your Phone
1. From standby mode, press UNLOCK (left softkey).
2. Enter your lock code and press CONTINUE (left softkey).
Tip
The first time you access the Lock Phone menu, you will be
advised to change the default lock code by pressing
CHANGE
(left softkey). Enter and re-enter your new lock code to proceed.
For details, see “Changing the Lock Code” on page 46.