Sanyo KHX0752 - Page 11

11
Address Settings (continued)
Wireless remote
control unit
address displays
……
X type
Position of
address switch on
signal receiver
(inside indoor unit)
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
T type
Position of
address switch on
signal receiver
(inside indoor unit)
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
K type
Position of
address switch
inside indoor unit
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3,set the
knob upward (1); conversely, for 4,
5 and 6, set the knob downward
(ON).
A, U, D type
Position of
address switch in
signal receiver
* The address switch
in the operation
area may be set to
any position.
……
For positions 1, 2 and 3, set the
knob to the left; conversely, for 4, 5
and 6, set the knob to the right.
OI-837-11-EG