To Next PageTo Next PageWhy is my Sanyo KS1271 not cooling well?
Several factors can cause poor cooling performance in your Sanyo Air Conditioner. Check the following: * Clean or replace a dirty or clogged air filter to improve airflow. * Reduce or eliminate heat sources in the room. * Ensure doors and windows are closed. * Remove any obstacles near the air intake or air discharge port to ensure good airflow. * Lower the thermostat setting.
What to do if my Sanyo Air Conditioner doesn't run at all?
If your Sanyo Air Conditioner isn't running, here are some things to check: * Make sure there isn't a power failure; restore power if needed. * If the leakage circuit breaker tripped, contact service center. * Consult your electrician or dealer if the line voltage is too low. * Replace the batteries in the remote control unit if they're run down.
What to do if the OPERATION lamp blinks and my Sanyo KS1271 Air Conditioner doesn't operate?
If the OPERATION lamp is blinking and your Sanyo Air Conditioner isn't working, there may be a trouble in system. Contact service center.
Why does my Sanyo KS1271 Air Conditioner compressor run but soon stops?
If the compressor runs briefly and then stops, there may be an obstruction in front of the condenser coil. Remove any obstruction.
Why is the OPERATION lamp on but the outdoor unit of my Sanyo KS1271 won't run?
If the OPERATION lamp is lit but the outdoor unit isn't running, it might be due to disturbance from cellular phones used near the air conditioner. Turn off the power, then restart the air conditioner after a while. You can also consult your dealer.
Why is my Sanyo Air Conditioner making a clicking sound?
A clicking sound from your Sanyo Air Conditioner during cooling operation may be normal. Plastic parts may shrink due to a sudden temperature change, causing the sound. It should disappear soon.
General| Brand | Sanyo |
|---|---|
| Model | KS1271 |
| Category | Air Conditioner |
| Language | English |
