What to do if the power supply wiring is not correctly connected in Sanyo Air Conditioner?
If your Sanyo Air Conditioner isn't getting power, the issue might be with the wiring. Ensure the power supply wires are properly connected to terminals No. 5 and No. 6 on the terminal plate located in the outdoor unit.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Split |
| Cooling Capacity | 12000 BTU/hr |
| Power Consumption (Cooling) | 1150W |
| Operating Temperature (Cooling) | 18°C to 43°C |
Step-by-step guide for installing batteries in the remote control unit.
Instructions on how to operate the air conditioner using the remote control.
Guidelines for optimal placement of the remote control unit.
Instructions for attaching the remote control holder to the wall.
Step-by-step guide for operating the air conditioner manually.
How to select automatic or manual fan speeds for optimal comfort.
Explanation of the energy-saving night setback temperature adjustment.
Instructions for setting various timer functions for automatic operation.
Guide on using the one-hour timer function for automatic shutdown.
How to manually adjust horizontal and vertical airflow or use sweep function.
Instructions for cleaning the indoor unit, outdoor unit, and filters.
How to remove, clean, and replace the anti-mold filter.
Guide on installing the optional air cleaning filter.
Steps for removing and remounting the air intake grille for cleaning.
To Next Page
