13
6. Dealer Mode Function
Press keypad “Menu” key and remote controller “Info” button to enter Dealer Mode function.
The Dealer Mode has 8 options: Dealer mode On/Off, Volume
Lock, Tuning Lock, Start Mode, OSD, RC, AC Power Mode and
Reset.
6-1) Dealer mode On/Off
This item is to switch Dealer mode to on or off.
The default setting is “Off”.
6-2) Volume Lock
This function is used to limit the maximal volume.
To switch the Volume Lock from off to on, it will use current
volume to be maximal limit volume.
The default setting is “Off”.
6-3) Tuning Lock
If Tuning Lock is set to on, the TV Channel Menu will be disabled.
The default setting is “Off”.
6-4) Start Mode
Start Mode is setting the source when you power on. There are If you want to set TV channel number, you
must select source input to TV before you entering Dealer Mode. When you select Start Mode to “TV”, then
exit dealer mode, it will use current TV channel number. The default setting is “Off”.
6-5) OSD
When this item set to “Off”, the OSD menu will not display on TV screen to prohibit user to use menu operation.
6-6) RC
When this item set to “Prohibit”, the remote controller will be prohibited to use.
But user still can use remote controller to enter dealer mode or factory mode.
The default setting is “Normal”.
6-7) AC Power Mode
This item has “On”, “Last” and “Standy” options.
“On”: When AC power is on, the TV will DC power on automatically.
“Standby”: When AC power is on, the TV will enter Standby mode.
“Last”: It will record the DC status last time AC power off. If TV is in Standby mode last time AC power off, TV
will in Standby mode when AC power on. If TV is on when AC power off last time, TV will directly DC power on
when AC power on.
6-8) Reset
This function will return all user setting values to factory default setting.
To Next Page
Loading...
