Sanyo LCD-32E3 - Page 15

15
7-5 HDMI terminal
Input HDMI signal (VG849 signal generator), separately input the signals listed in table6 and check the display and
sound (32KHz, 44.1KHz, 48KHz) at any situation (power on, channel switch and format convert, etc.)
Table6 PC signal format
Signal mode
Horizontal
frequency
Dot clock
frequency
No
Signal
name
Resolution
Vertical
frequency(Hz)
(KHz) (MHz)
Remarks
1 VGA 640 x 480 59.94 31.469 25.175 ʳ
2 SVGA 800 x 600 60.317 37.879 40 ʳ
3 XGA 1024 x 768 60.004 48.363 65 ʳ
4 1280 x 768 59.87 47.776 79.5 ʳ
5
W-XGA
1360 x 768 60.015 47.712 85.5 ʳ
6 SXGA 1280 x 1024 60.02 63.981 108 ʳ
7 480i 720(1440)x480 59.94 15.734 27 ʳ
8 480P 720x480 59.94 31.5 27.03 ʳ
9 720P/60 1280x720 60 45
74.25
ʳ
10 1080i/60
1920x1080
60 33.75
74.25
ʳ
11 1080p/60
1920x1080
60 67.5
148.5 32" and 42"
Only
12 1080p/24
1920x1080
24 27
74.25 32" and 42"
Only
7-6 other functions check
a) Check the turn on/turn off timer, sleep timer, picture/sound mode, OSD, stereo and analog TV Close Caption, V-
Chip, etc.