Sanyo LCD-32E3 - Page 70

CANADA SERVICE MANUAL CHANGE LIST
DATE Page VERSION CHANGE ITEM
24 /June
2009
Page 64 / 66 / 68 / 70 01 Add power code on APPENDIX-A of each
models.
04 / August
2009
Cover page, Page 29~70 02 Update cover page:
1. CHASSIS NO. Add new model SSA32TG-00.
2. Reference NO. change from SM0945002-01
to SM0945002-02
Trouble shooting:
1. Add new power board for SSA32TG-00
SCHEMATIC DIAGRAM of ELECTRON:
1. Change all schematic diagrams for all
inch. (Change page from 29~52 to 29~45 )
SCHEMATIC DIAGRAM of POWER BOARD:
1. Add CHASSIS NO. for each on Power
Drawing and Power second sauce Drawing.
2. Add Power PCB schematic diagram of
SSA32TG-00. (Change page from 53~65 to
46~59 )
APPENDIX-A update:
1. Add CHASSIS NO. for each LCD modules
and Power PCB ASS’Y.
2. LCD-32E3 version change to 02.
3. Add new Panel Part NO.: CLAC6VG3201R1
4. Add new Power PCB Part NO.:
CLPK101V1290I
(Change page from 66~73 to 60~67 )
22 / Sep.
2009
Cover page, Page
16/26/27/28/46/47/60/62/64
and 66.
03 Update cover page:
1. CHASSIS NO. Add new model SSA19TC-00.
2. Reference NO. change from SM0945002-02
to SM0945002-03
Working principle analysis of the unitʳˍʳ
Update IC No. (Change page 16 )ʳ
Trouble shooting:
Add CHASSIS NO. SSA19TC-00 power board
(Change page from 26~28 )
SCHEMATIC DIAGRAM of POWER BOARD:
1. Add CHASSIS NO. on 19” Power Drawing.
(Change page from 46~47 )
APPENDIX-A update:
1. Add SSA19TC-00 CHASSIS NO. part list
2. Update LCD-26E3 part list and update each
CHASSIS NO. part list.
3. Update part list version
LCD-19E3 version change to 02,
LCD-26E3 version change to 02,
LCD-32E3 version change to 03,
LCD-42E3 version change to 02.