Sanyo LCD-32XH3 - On-screen Service Menu System Operation; General Service Menu Information

CH
CH
SERVICE 0.14 00
INDEX 1 CTI DELAY-TVPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
-17-
On-screen Service Menu System
VIDEO MODE
POWER
RECALL
DISPLAY
MUTE
AUDIO MODE
General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
■ How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1.
Press and hold the MENU button on top controls.
2. Keep pressing the MENU button and press the MUTE button on the remote control, and the service mode menu will
be displayed.
[ Service Mode Menu ]
VIDEO MODE
VOLUME
+
MENU
MENU
To select service item
1) Select “INDEX” line and press + or - button.
To adjust data:
1) Select “DATA” line by pressing or button.
■ To exit service mode
To exit service mode, turn the TV off by pressing the POWER ON/OFF button on the top controls
or remote control.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
Data Value
Target IC
Sub Address of IC
Item No.
Item Name
CH
CH
SERVICE 2.06 00
INDEX 2 CTI DELAY-VideoPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
SERVICE 2.06 00
INDEX 2 CTI DELAY-VideoPAL-N
IC TVP15147
ADDR 2D
DATA 00 00000000
2) Press + or - button to adjust data.