Sanyo LCD-32XH3 - Circuit Board Removal Procedure

-29-
Mechanical Disassembly
3. Circuit Board Removal
1. Remove 9 screws and take ASSY, PWB, POWER off.
2. Remove 7 screws on the circuit board and 3 screws that are fixing the Terminal Holder. Then take ASSY, PWB, MAIN
off with Terminal Holder.
ASSY, PWB, POWER
ASSY, PWB, MAIN
Terminal
Holder
3. Remove 2 screws and take ASSY, PWB, KEY off from the Cabinet Front with Top Cover.
And remove 3 screws to take ASSY, PWB, KEY off from Top Cover.
Top Cover
ASSY, PWB, KEY