Repeat play
Press the REPEAT button before or during play.
Each time the button is pressed, the repeat mode
changes as follows:
The REPEAT indicator blinks:
One track repeat mode.
The REPEAT indicator lights:
All tracks repeat mode.
The REPEAT indicator goes out:
Normal play mode.
PROGRAMMED PLAY
Up to 16 tracks on a disc can be programmed for
play in any order.
- To begin the programming procedure, select
“CD” function first,
- The same track can be programmed more
than once.
Load a disc that you want to programme be.
fore starting programmed play.
1.
2.
3.
4,
5.
6,
Press the STOP/CLEAR button if necessary.
Press the MEMORY button [he MEMORY
indicator and “Pr” blink.
Select a track by using the SKIP/SEARCH
buttons.
Press the MEMORY button.
Repeat steps 3-4 to programme additional
tracks,
Press the PLAY/PAUSE button to start play.
The MEMORY indicator remains lit,
When all programmed tracks have been
played, the player stops automatically.
- The programme contents are retained in
memory.
To cancel oroarammea mav. Dress the
STOP/CLEAR b;tton twice.’ ‘” ‘
Checking the programme
Press the MEMORY button twice in the stop
mode, the programmed tracks sequentially ap
pear on the display.
Changing the programme
To add a new selection to a program:
1. In the stop mode, press the MEMORY
button,
2, Select the track number as explained
above,
3. Press the MEMORY button.
LISTENING TO TAPES
2.
3.
Set the FUNCTION switch to TAPE.
Press the STOP/ EJECT button, The cassette
holder opens.
Load the cassette into the cassette holder
IQA
@
4,
5.
After loading the cassette, press the cassette
holder back into position.
Press the PLAY button to begin playback.
Press the STOP/ EJECT button to stop play-
back at any time. Press it again to remove the
cassette.
When the end of the tape has been reached,
the tape stops automatically.
Note:
- Use the normal tape (TYPE 1).
Endless tapes cannot be used.
Do not use C-1OO (or longer ) tapes. They
may jam in the mechanism.
Pause
Press the PAUSE button to temporarily stop play-
back or recording. Press it again to resume
operation,
Fast forward and rewind
Press the FFWD or REW button. When the de-
sired location has been reached, press the
STOP/EJECT button.
To Next Page
Loading...
