LISTENING TO THE RADIO
1. Set the FUNCTION switch to RADIO,
4. To turn the radio off, set the FUNCTION
2. Set the BAND switch to FM STEREO or AM
switch to TAPE/OFF.
as desired.
Note:
To improve reception
If the signal from an FM stereo station is weak
FM: Pull out the telescopic aerial and
and reception is poor, set the BAND switch to
adjust its position.
FM, The reception may be improved, but the
AM: Rotate the unit.
sound will be monaural.
3, Tune in a desired station by turning the TUN.
ING control,
RECORDING
“ ...
Recording copyright material without permission
Recording from the radio
of the ‘cop-y-right owners is usually an 1,
infringement. If you wish to re-record copyright 2,
material, permission from the copyright owner is 3,
necessary. SANYO does not approve of, and 4,
cannot be held responsible for, any unlawful use
of this machine.
Load ; blank cassette.
Tune in the radio station to be recorded,
Press the REC button to start recording.
Press the STOP/EJECT button to stop
recording.
When beat is heard
Recording compact discs (Synchronous
Beat (a high-pitched noise) may sometimes be
recording)
heard during the recording of radio broadcasts, If
1.
2,
3,
4.
5.
Load a blank cassette.
this occurs, set the BEAT CANCEL switch to the
Select “CD” function.
position that reduces the level of the beat noise,
Load the disc to be recorded.
- Select the track number if required.
For programmed recording,
programme the material in advance
(as described under
“ PROGRAMMED PLAY “).
Press the REC button. The PLAY button is
engaged simultaneously and CD recording
starts,
Press the STOP/EJECT button to stop
recording.
8
To Next Page
Loading...
