MP3 CD Play
1. Load the MP3 CD. (See page 16.)
The total number of files of the MP3 CD appears
on the display.
2. Press the PLAY/PAUSE i button to start
playback.
3. Press the MEMORY/FOLDER button,
“FOLDER” blinks on the display, then press
the f
/FILE-
or FILE+/e button (or the
FOLDER- or FOLDER + button on the remote
controller) to select the desired folder.
4. When the first file number of selected folder
appears, press the f
/FILE-
or FILE+/e
button to select a desired file.
5. Press the PLAY/PAUSE i button to start
playback.
6. Press the STOP n button at any time to stop
the playback.
Note:
- If there is no music data, “no” appears.
- Only select the folder in playing mode.
PROGRAMMED PLAY
Up to 32 files on a disc can be programmed for
play in any order.
- To begin the programming procedure, set
FUNCTION switch to “CD/USB” first.
- The same file can be programmed more than
once.
- Load a disc that you want to programme before
starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the “P01”
a n d “ M E M O RY ” a pp e ar b r i e fl y t h en
“ ” appears and “MEMORY” blinks.
3. Select a file by using the f
/FILE-
or FILE+/e
button (or the FOLDER- or FOLDER + button
on the remote control).
4. Press the MEMORY/FOLDER button, the
“P02” and “MEMORY” appear briefly, then
“ ” appears and “MEMORY” blinks.
5. Repeat steps 3-4 to programme additional
tracks.
6. Press the PLAY/PAUSE i button to
start playback. “P01” appears briefly, then
first programmed file appears and “MEMO-
RY” remains lit.
7. Press the STOP n button to stop programme
playback at any time.
To cancel programmed play, press the STOP n
button twice during play.
Checking the programme
In stop mode when MEMORY remains lit, press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new file to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
To change a file:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the file number to
be replaced is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
To Next Page
Loading...
