Sanyo MCO-19MUVH - Page 76

75
Name Multi-gas Incubator
Models MCO-19M MCO-19M(UV) MCO-19M(UVH)
Accessories
3 trays, 3 sets of tray supports, 3 gas tubes, 1 humidifying pan,
1 gas injection nozzle, 1 gas injection nozzle tube
1 pair of stacking plates A and B, 2 protective stickers, 6 tube bands
Optional accessories
H
2
O
2
Generator (MCO-HP)
H
2
O
2
Decontamination Kit (MCO-HL)
Standard equipment
UV Lamp Add-on Kit
(MCO-19UVS)
Standard equipment
H
2
O
2
Decontamination Reagent (MCO-H2O2),
Automatic CO
2
Standard Gas Calibration Kit (MCO-SG),
Gas Pressure Regulator (MCO-100L),
Extra Trays (MCO-47ST, includes 2 tray supports),
Half Trays (MCO-25ST), Automatic CO
2
Cylinder Changeover System (MCO-21GC),
Roller Base (MCO-18RB), UV lamp replacement kit (MCO-20UV)
Stacking spacer (MCO-18SB, when stacking on the MCO-175),
Stacking spacer (MCO-21SB, when stacking on the MCO-20AIC)
Ethernet (LAN) Interface (MTR-L03), RS232C/RS485 Interface (MTR-480)
SANYO Data acquisition software (MTR-5000)
4-20mA Interface (MCO-420MA, USA only)
Note: Designs and specifications are subject to change without notice.
PERFORMANCE
Temperature control range
Ambient temperature+5 to 50
o
C (ambient temperature: 5 to 35
o
C)
Temperature distribution
± 0.25
o
C (ambient temperature: 25
o
C, setting: 37
o
C, CO
2
: 5%, O
2
: 5%, no load)
Temperature variation
± 0.1
o
C (ambient temperature: 25
o
C, setting: 37
o
C, CO
2
: 5%, O
2
: 5%, no load)
CO
2
control range
0 to 20%
CO
2
variation
± 0.15% (ambient temperature: 25
o
C, setting: 37
o
C, CO
2
: 5%, O
2
: 5%, no load)
O
2
control range
1 to 18% and 22 to 80%
O
2
variation
± 0.2% (ambient temperature: 25
o
C, setting: 37
o
C, CO
2
: 5%, O
2
: 5%, no load)
Chamber humidity
95% ± 5%
Applicable environment
condition
Temperature: 5 to 35
o
C, Humidity: 80% max.
(The designed performance may not be obtained
If the ambient temperature is equal or less than 15
o
C)
Noise level
30 dB (A scale)
Power consumption
Max. 354 W Max. 335 W
Heat emission Max. 1,274 kJ/h
Max. 1,206 kJ/h
Rated voltage, frequency
110 to 120 V, 60 Hz 220 V, 60 Hz 220 to 240 V, 50 Hz
Amperage
Max. 3.1 A Max. 1.5 A Max. 1.5 A
Note: The unit with CE mark complies with EC directives.
Based on our measuring method.
Designs and specifications are subject to change without notice.
Get other manuals https://www.bkmanuals.com