Need help?Do you have a question about the Sanyo MDF-136 and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | MDF-136 |
| Category | Freezer |
| Type | Upright Freezer |
| Total Capacity | 136 liters |
| Defrost System | Manual |
| Door Lock | Yes |
| Power Supply | 220-240V, 50Hz |
| Color | White |
Explains the significance of warning and caution signs and their potential consequences.
Explains safety symbols and a specific warning mark found on the unit.
Details electrical safety, proper installation locations, and handling of hazardous substances.
Outlines critical operational safety measures to prevent injury, fire, or damage during use and storage.
Provides safety guidelines for handling, usage, and moving the unit, including precautions against tipping and damage.
Details initial operation, alarm behavior, thermometer accuracy, and access port usage.
Advises on proper cleaning agents, frost removal techniques, and temperature variations within the unit.
Guides on loading capacity and explains potential cabinet heating due to ambient temperature or internal heating elements.
Specifies the required environmental conditions for safe and optimal operation, including altitude, temperature, humidity, and electrical supply.
Identifies and describes the external parts of the freezer using a diagram.
Explains the functions of the control panel buttons and indicators, including alarm testing and temperature setting.
Details the criteria for selecting a suitable installation location to ensure proper performance and safety.
Outlines the steps for preparing the unit, leveling it, securing it, and ensuring proper electrical grounding.
Emphasizes the necessity of using a grounded power outlet and warns against improper grounding methods to prevent electric shock.
Provides a step-by-step guide for installing the optional temperature recorder, including sensor placement.
Details the final steps for mounting the temperature recorder sensor and sealing the access port for insulation.
Guides users through the initial power-on sequence, alarm checks, and gradual loading of the unit.
Details the remote alarm terminal's function, connection, and how alarms are indicated and silenced.
Provides a step-by-step guide for adjusting the desired chamber temperature and notes its factory setting and operational range.
Describes the key lock feature that prevents unauthorized changes to temperature settings.
Details how to configure the high and low temperature alarm thresholds using specific menu codes.
Provides a step-by-step guide to setting the high temperature alarm limit.
Provides a step-by-step guide to setting the low temperature alarm limit.
A comprehensive table detailing various alarms, their triggers, indications, and safety responses.
Provides important notes regarding the operation of alarms, including power failure, silencing, and memory retention.
Details the procedure for customizing the time delay before alarms reactivate after being temporarily silenced.
Outlines the recommended schedule and methods for cleaning the freezer's exterior and interior surfaces.
Describes the step-by-step process for manually defrosting the freezer chamber to maintain optimal performance.
Lists common reasons for insufficient cooling or complete failure to cool, aiding in diagnosis.
Addresses specific operational problems such as the unit not responding to setting changes or generating unusual noise.
Provides crucial safety warnings and procedures for the proper disposal of the unit to prevent accidents.
A detailed breakdown of the technical specifications for each model, including dimensions, capacity, and components.
Presents performance metrics such as cooling range, electrical requirements, power consumption, and noise levels for each model.
To Next Page
