Sanyo MDF-U2086S - Proper Operation; Initial Setup Steps; Freezer Components

8
PROPER OPERATION
1. Remove packing and let the freezer compartment air out with the door open
2. Install the shelves and close the doors.
3. Connect the power cable to the power supply and turn on the power switch.
4. Set the desire desired temperature. (Initial setting : -86 ℃)
5. Cool down to the desired temperature.
FREEZER COMPONENTS
MDF-U2086S
13
10
9
4
8
12
1
2
11
3
7
5, 6