PARTS DESCRIPTION AND FUNCTION
(Control panel
Pressure gauge
Indicates the pressure
within the chamber.
Setting button (TEMP.TIM/UP.vDOWN)
Used for setting and displaying the sterilization
temperature and sterilization time, and for dis-
playing the remaining sterilization time. (Refer to
page 21 for detailed instructions.)
Power switch (MAIN)
PRESSURE GAUGE
TEMP/TIMER
DOOR ,m
LAMP L_J
D
I MIN I
I HIGH PRESSURE
(RESETS ( START
Reset button
Cancels the operation.
Pressing this button
for about one second in
the during operation
causes a beep to sound
and switches the unit to
standby status.
SAflYO
Labo Autoclave
Start button
Starts sterilization.
Switch button
When pressing the switch button with magnet-holder, Handle
switch will start.
,— EXHAUST —>
Exhaust knob
This knob is used to re-
lease the air within the
chamber.
Turn clockwise this knob
to close and counter-
clockwise to open.Close
the knob before starting
sterilization.
13
To Next Page
Loading...
