Sanyo MLS-2420U - User Manual

INSTRUCTION MANUAL
Labo Autoclave MLS-3020U
MLS-2420U
Thank you for purchasing a Sanyo Autoclave.
• Do not operate the unit until you have become familiar with this information.
• After reading this instruction manual, store it in a safe place for future reference.
CONTENTS
Page
( LIMITATION OF LIABILITY AND INDEMNITY ) 1
( INTRODUCTION OF THIS STERILIZER^) 2
( WARNINGS AND CAUTIONS ) 3-8
( PARTS DESCRIPTION AND FUNCTOR) 9-14
(PREPARATION FOR USE") 15-16
( ITEMS TO BE STERILIZED ) 17-18
( OPERATING INSTRUCTIONS ) 19-25
(TROUBLE SHOOTING GUIDE ) 26-27
( IN CASE OF POWER FAILURE ) 27
( MAINTENANCE AND CARET) 28
( SPECIFICATIONS ) 29-30

Sanyo MLS-2420U Specifications

General

Magnification	40x - 1000x
Focusing	Coaxial coarse and fine focusing
Type	Biological Microscope
Eyepiece	WF10x
Objectives	4x, 10x, 40x, 100x
Stage	Mechanical stage
Condenser	Abbe condenser
Power Supply	AC adapter (100-240V)

Summary

Warnings and Cautions

Parts Description and Function

Control Panel Overview

Details the main control panel components and their functions for operating the sterilizer.

Preparation for Use

Unit Installation Guidelines

Provides instructions for physically placing and setting up the sterilizer unit.

Electrical Connection and Settings

Covers electrical hookup requirements and environmental settings like elevation.

Items to be Sterilized

Sterilizing Liquids and Performance Check

Plastic Containers and Liquid Container Requirements

Operating Instructions

Exhaust Tank Setup and Water Preparation

Loading Items and Closing Exhaust Knob

Closing Door and Setting Parameters

Details on securing the door and configuring temperature and time settings.

Starting the Sterilization Cycle

Steps to begin the sterilization process and the operation of the timer.

Cycle Completion and Atmospheric Pressure Return

Removing Items and Stopping Operation

Trouble Shooting Guide

Digital Indicator Lamp Flashes

Error Indications and Causes

In Case of Power Failure

Maintenance and Care