Sanyo MLS-3751L User Manual

7. Process Flow and Operations
(OOperations and displays
I Operations and Process!
Digital Display I
Digital Display
II
Turn ON the power.
Boiling point setting temperature is
Bar display "- - -" is displayed for the
displayed for the first 4 sec. Thereafter,
f--
first 4 sec. Thereafter, the display
the display changes to stand-by display. changes to stand-by display.
STAND-BY
~
Setting temperature is displayed.
f--
Setting time and cycle are displayed
However, The temperature in the alternately. However, the water heating
I
chamber is displayed by pressing the temperature is displayed by pressing the
" ... " + "T" buttons at the same time. If
" ..... + " ..... buttons at the same time.
If
Put sterilizing object
the temperature
is lower than 25"C, "La" the temperature is lower than 25"C, "La"
and close the cover.
is
disolaved. is disolaved.
I
Press the start
button.
"COVER LOCK " lights up and the process monitors flicker.
HEAT
f--
Temparature in the chamber is
f--
Nothing is displayed. However, the water heating
temperature is
displayed by pressing the ~ ... ~ + " ....
displayed. However, if the temperature
buttons at the same tima. If the temperature is lower
is lower than 25"C, "La" is displayed.
than 25"C. ·Lo~ is displayed.
STERI
(MELT
)
Temperature in the chamber is
Kemalnlng smnllzatlon orne IS CISPISyeC. However,
r--
displayed.
r--
the water heating temperature is displayed by
pressing the""'~ + ..... ~ buttons at the same time.
I
EXHAUST
Temperature in the chamber is
NOlmng IS cisplaye~. nowever, me WSIer eaung
r--
displayed.
r--
temperature is displayed by pressing the" ..... +
.. ..... buttons at the same time.
1""---------
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._----
Elapsed keep-warm time is displayed_ However, the
Temperature in the chamber is
water heating temperature is displayed by pressing
KEEP WARM
f-- f--
the tt ... w + ~ ... u buttons at the same time_ By pressing
displayed.
the ttRESERV" + ~ .... at the same Ume, the elapsed
keep-warm time is displayed in minute_
STERI/KEEP WARM MELT/KEEP WARM
----------
--------------------------------------------------------------------------------------------------------
Bar display" " is displayed. However, the
Temperature in the chamber is
water heating temperature is displayed by
COMPLETE
r--
displayed. However, if the temperature
r--
pressing the .... " + MT" buttons at the same
is lower than 25"C, "La" is displayed.
time. If the temperature is lower than 25"C,
"Le" is displayed.
I
"COVER LOCK "goes out and the all process monitors light up and the "COMPLETE"
I
flickers.
pen me cover ana
take out sterilized
obiectCs).
Setting temperature is displayed_ However,
Setting time and
cycle are displayed
I
the temperature in the chamber is displayed
alternately_
However, the water heating
~
by pressing the ... " + MT" buttons at the
temperature is
displayed by pressing the ... D +
STAND-BY
same time. If the temperature is lower than
f--
"T- buttons at the same time_ If the
25"C, "Lo" is displayed.
temperature is lower than 25"C, "Lo· is
displayed.
- 13-

Sanyo MLS-3751L Specifications

General

Brand	Sanyo
Model	MLS-3751L
Category	Laboratory Equipment
Language	English