Sanyo MLS-3781L - Power Not Supplied to Heater

Check. the
connection.
Check that the housings in the same color are connected.
(3) "___ ..,.,..,.. on the _ even when the cover Is closed.
1) Check the Items 2) and 3) of "L.Jd" appears on the display Correct Kif In trouble.
and does not start
2) Check. the conductivity the switch when the both lock shafts Since the switch is turned OFF when the lock shafts open, the
switch
Is not conductive.
If the switch is conductive, rwplace the housing set M.
(5) _ is not .. "".... to tho twater.
1) Check the exhaust hose. Check. if the hose is bent or clogged in the product when
exhaust 'lank Is Installed. Correct Kif bent or clogged.
2) Check the hose in the exhaust tank. Check if the hose is bent or clogged.
Correct Kif bent or clogged.
3) Check if the exhaust hole i, blocked with any sterilization Remove it if the exhaust hole is blocked.
otfect or sterilization bag.
- 38-