Sanyo MR-410 - User Manual

All fasteners subject
to metric dimension
of International Orga-
nization for Standardi-
zation. .
Portable Cassette Recorder
MODEL
MR-410
SERVICE MANUAL
SANYO ELECTRIC CO., LTD.
INTERNATIONAL DIVISION : SANYO ELECTRIC TRADING CO., LTD.
OSAKA, JAPAN
‘SPECIFICATIONS
Recording system AC bias, double track Frequency response 50 to 10,000 Hz .
Erasing system DC erase Transistors | 25B303 x I 2SB187 x 1
Tape speed 1-7/8 ips. (4.8 cm/sec.) 2SB186 x 1 2SB405 x 2
Recording (playback) 2SB185 x 1 ,
time 1 hour (C-60) Diodes 1S188 x 1 181849 x 2
Rewind and fast Thermistor SDT-06 x 1
forward time 1’ 45” (C-60) Speaker 4” (10 cm) P. D. S. 8Q
Output
power
1.5W
max.
Power
source
AC;
120/200/240
V,
50/60Hz
multivoltage
Wow and flutter 0.3% RMS DC; 6V, “C’’-size (UM-2) batt. x 4
Signal
to
noise
ratio
40dB
Dimensions
6-7/16”(W)
x
2-13/16
“(L)
x
6-3/16"(H
Terminals MIC. 10KQ Weight 4.8 lbs.
AUXIN 270KQ Accessories Microphone, audition cassette, AC cord
EXT SP 82
DISASSEMBLEY INSTRUCTION——
To remove the amplifier and mechanism from the cabinet:
1. Pull out the Tone and Volume control knobs.
2. Place the recorder front side down and remove the screw from
the center of the cabinet back.
CABINET BACK
PUSH STRAIGHT
Jf , AND LIFT UP
3. Depressing the cabinet bottom with both thumbs, open’ the
FOR CABINET BACK
REMOVAL FIRST TAKE OFF
THIS SCREW
back cabinet. See Fig. 1 below.
ll
- PUSH STRAIGHT
AND. LIFT UP
CABINET FRONT
Fig 1.

Sanyo MR-410 Specifications