What to do if my Sanyo Projector cannot be turned on due to an abnormal condition?
If your Sanyo Projector detects an abnormal condition and cannot be turned on, unplug the AC power cord and plug it in again. If the projector turns off again, unplug the AC power cord and contact the dealer or service center for assistance. Do not leave the projector on, as it may cause an electric shock or fire hazard.
Why my Sanyo Projector cannot be turned on due to high temperature?
The projector cannot be turned on because the temperature inside the projector is abnormally high. When the projector has cooled down enough for the temperature to return to normal, the POWER indicator will stop blinking, and the projector can then be turned on.
What to do if my Sanyo PLC-XU4000 cannot be turned on because the projection lamp is being cooled down?
If your Sanyo Projector cannot be turned on because the projection lamp is being cooled down, wait until the cooling process is completed and the POWER indicator stops blinking before attempting to turn it on.
What to do if my Sanyo PLC-XU4000 Projector is in stand-by mode?
If your Sanyo Projector is in stand-by mode, press the ON/STAND-BY button to turn on the projector.
General
