Need help?Do you have a question about the Sanyo PLC-XU300 and is the answer not in the manual?
General| Vertical scan range | 50 - 100 Hz |
|---|---|
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 500:1 |
| Screen size compatibility | - \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | ±30 ° |
| Focus | Manual |
| Digital zoom | 16 x |
| Aspect ratio | 4:3 |
| RS-232 ports | 1 |
| Compatibility | U-XGA S-XGA S-XGA+ W-XGA XGA S-VGA VGA Mac |
| Dimensions (WxDxH) | 326 x 231.6 x 92.6 mm |
| Power requirements | 100 - 240 V |
| F-number (relative aperture) | 1.60 |
| Lamp type | UHP |
| Lamp power | 225 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 2500 h |
| Headphone outputs | 2 |
| Serial interface type | RS-232 |
| Power consumption (standby) | 3.2 W |
| Power consumption (typical) | 287 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Weight | 2600 g |
|---|---|
| Package weight | 5400 g |
Key lock and PIN code lock for projector security.
Enables input search, auto keystone, and auto PC adjustment.
Warnings regarding light exposure, installation space, and ventilation.
Explains the function of each button on the remote control.
Details how to connect the projector to a computer using VGA and audio cables.
Details how to connect video equipment via RCA and S-Video.
Details connecting component video sources via VGA and Scart.
Step-by-step guide to turn on the projector.
Instructions for entering the PIN code to unlock the projector.
Step-by-step guide to turn off the projector and cooling procedures.
Guide to navigating and using the projector's on-screen menu system.
Explains frequently used buttons on the remote control.
Selects input source for Computer 1 (RGB/Component/RGB Scart).
Selects input source for Computer 2 (RGB).
Automatic adjustment of sync, dots, and position for computer signals.
Manual adjustment of PC signal parameters for optimal display.
Adjusts contrast, brightness, color, tint, and white balance for video.
Selects Video or S-video as the input source.
Selects Component or RGB Scart as the input source.
Automates input search, keystone, and PC adjustments.
Enter, change, or lock the logo PIN code for security.
Reduces power consumption by turning off the lamp or setting timers.
Locks top control and remote buttons to prevent unauthorized operation.
Enter or change the PIN code for projector security.
Prevents projector operation without entering PIN code.
Explains projector status indicated by warning lights.
Procedure for replacing the projector's lamp.
Common problems and their solutions for projector operation.
Further troubleshooting tips for image and control issues.
Detailed specs for mechanical, panel, signal, optical, interface, audio, power.
Explains indicator lights and corresponding projector status.
To Next Page
